bonjour
qui a des retours sur les ailerons K4 ? je les trouve plutôt souple
existe t'il des adaptateurs US vers mini tuttle ?
merci pour ts les retours
bobio
Si tu es dans le morbihan, je peux te mouler des talons mini tuttle sur tes US.
|
Les derniers posts
Modérateurs: manutzh, thomas, Ad, matalsurfing
bonjour
qui a des retours sur les ailerons K4 ? je les trouve plutôt souple
existe t'il des adaptateurs US vers mini tuttle ?
merci pour ts les retours
bobio
Hi Erwann,
I think that with a 14.0 or 15.5 centre fin will make quite a difference. Are the fins you have RTM or G10? If they are G10, if you want to increase speed as well you can chose a whole set of our new custom RTM fins with 13.5 sidefins and 14.0 centre fin.
The K4 profiles are not matching the angles because they are very asymmetrical giving more drag and would require a lot more added toe in. The stubby´s are too straight, they do not twist as much but still do flex sideways so would cause the tail to skip out of the turn.
Saludos,
Bouke
R-two a écrit:Ouaip, je sais mais t'as pas un 15.5 RTM qui traine toi..?
joj a écrit:Perso j'ai équipé mon custom avec un set 10+14 en K4 qui marche treeees bien au surf.
j'ai aussi un 16 mfc pour les conditions On-Shore et B&J histoire d'avoir un appui latéral plus rigide.
Hi,
Great to hear from you. I think for sure it will be good for you to have smaller fins for windier conditions. We have a size guide here..
http://www.k4fins.com/about/sizeguide/7.html
So for 4.7 and below you would be on 12 and 14.
You want to select sizes similar to those you would use in g10. The board is looser but will have more grip. Although as you say onshore conditions I would stay with reasonably large sizes.
I'd recommend you buy 12 and 14 Stubbies, these are our stiffer fins for jumping and onshore.
The Ezzy asymmetric fins work super well for riding in good conditions, but are perhaps not so good in a straight line. I think you'd need the 1 degree version for the Witchcraft as I'm sure that has angled front boxes.
Hope that helps, any more info needed let me know,
Best Regards
Steve
Retourner vers Rubrique test matériel
Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 8 invités